CONTROL BUTTONS
① Power Button
Hold to start/shut down the speaker.
Under PC/Flash Disk mode, Nature Effect mode, or AUX mode,
click to roll back to Bluetooth mode.
② Plus Button
Click to crease volume(tone at maximum),
Hold to switch next song
③ Play/Pause
Click to Play/Pause, Hold to disconnect present Bluetooth.
④ Minus Button
Click to decrease volume,
Hold to switch previous song.
⑤ Nature Effect (Optiona)
⑥ EQ Mode Switch
BLUETOOTH PAIRING
Press the Power Button to switch Cu°Feohna on. After the product indicator turns flashing blue, Cu°Feohna will enter bluetooth pairing mode automatically.
Make sure the speaker is within three meters from the mobile device.
Switch on Bluetooth on your device. Find the device list and select Cu°Feohna. The product indicator turns solid blue, a sound prompt is heard and Cu°Feohna is ready to play.
AUX MODE/PC MODE /Nature Effect MODE CONNECT AND CUT OFF
Plug one end of the 3.5mm AUX cable into the AUX input
jack on the speaker and the other end into the device.Cu°Feohna will enter AUX mode automatically.Plug a Type-C cable into the Type-C jack and connect it to a PC or Flash Disk, Cu°Feohna will enter PC mode automatically.
After completing the connection, you can adjust volume on the connected device.
Under the AUX mode, Nature Effect Mode or PC/Flash Disk mode, Press the Power button to switch Cu°Feohna back to Bluetooth mode.
DISCONNECT THE BLUETOOTH
Press and hold the Play button for two second to disconnect
the Bluetooth connection and make Cu°Feohna return to pairing mode.
NATURE EFFECT MODE
Insert special nature effect TFcard in TF port, and press Nature Effect Mode Button. The speaker will turn in Nature Effect Mode.
The speaker could provide multiple natural effect like acean waves, lake, pastoral, forest, breeze,ravine stream etc.
EQ MODE CHOOSING
Press the EQ Button to choose the different EQ modes in order.
1. Vocal
2. Tube
3. Studio
Vocal Mode is default, click a time to Tube mode, click again to Studio Mode, cycle in a row.
MIC EQ MODE CHOOSING(FEOHNA ULTRA MIC EDITION ONLY)
Hold the EQ Button to choose the different Mic EQ modes in order.
1. Singer
2. Rock
3. Host
Singer Mode is default, Hold 2 seconds to Rock/ Host mode, cycle in a row.
WHAT’ S IN THE BOX
1x Cu°Feohna SPEAKER
1x USB to Type-C charging cable
1x This User Guide
FUNCTION PORTS
AUX in port: Use the attached 3.5mm to 3.5mm audio cable to connect the speaker to an analog audio source.(with ‘restart’ pinhole inside)
MIC in port: CONNECT microphone with 3.5mm cable.
Type-C charging port: Use the attached Type-C to USB charging
cable to charge your speaker.
Type-C digital port: Use a Type-C cable to connect with PCor OTG
devices (smart phone, flash disk, etc.)
TF port: Insert special NATURE MODE mircoSD cards.
CHARGING YOUR SPEAKER
1.Connect one end of the included USB Charging Cable to the Charging Port on your speaker. The plug the other end of the USB Charging Cable into a suitable USB port on your computer, notebook or power bank to recharge your speaker’ s internal rechargeable battery.
2.When charging, a red LED light will illuminate to indicate that the unit is charging. The red light will turn green when your unit is fully charged (under both turn-on/off speaker status).
Important safety instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’ s instructions.
8) Do not install near any heat sources such as radiators, heat registers,stoves, or other apparatus (including amplifiers) that produce heat.9) Do not defeat the safety purpose of the polarized plug. A polarized plug has two blades with one wider than the other. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15) CAUTION: Danger of explosion exists if battery is incorrectly replaced. Replace only with the same or equivalent type.
16) WARNING: The battery (battery or batteries or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
17) WARNING: The direct plug-in adapter is used as disconnect device; the disconnect device shall remain readily operable.
WARNING:
To reduce the risk of fire or electric shock, do not expose this
appliance to rain or moisture. Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases,are placed on the equipment.
The max ambient temperature should not exceed 40 °C.
WARNING: The mains plug/appliance coupler is used as disconnect device,the disconnect device shall remain readily operable. No naked flame sources,such as lighted candles should be placed on the product.
Important!
-Avoid placing the product in direct sunlight or direct artificial light, such as a spotlight.
-Make sure that the product is set up, placed and connected in accordance with the instructions.
-Place your product on a firm surface or stand where you want it placed permanently.
-Do not place any items on top of your product.
-Do not subject the product to high humidity, rain or sources of heat.
-The product is intended for indoor use in dry, domestic environments only (not applicable to portable products).
-Leave enough space around the product for adequate ventilation.
-Do not connect any of the products in your system to the mains until you have connected all the cables.
-Do not attempt to open the product. Leave such operations to qualified service personnel.
-The product can only be switched off completely by disconnecting it from the wall socket.
FCC STATEMENT:
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.